CC4307X11-2 Part by Timken Aerospace Inc with NSN 3110-00-106-5091 - Request a Quote Now

Part Number: CC4307X11-2

Manufacturer: timken aerospace inc

NSN: 3110-00-106-5091

CAGE Code: 60380

NIIN: 001065091

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number CC4307X11-2 from Timken Aerospace Inc (CAGE Code 60380), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CC4307X11-2 Details:

Part number CC4307X11-2 is manufactured by Timken Aerospace Inc and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-00-106-5091, the NIIN of this item is 001065091, its INC is 00040, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CC4307X11-2

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CC4307X11-2 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3110-00-106-5091, 3110001065091

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.3750 INCHES NOMINAL
ABHP	OVERALL LENGTH	1.9550 INCHES MINIMUM AND 2.0320 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7425 INCHES MINIMUM AND 0.7440 INCHES MAXIMUM
ADZG	LUBRICATION MATERIAL	GREASE
AGRJ	STUD DIAMETER	0.3125 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.5160 INCHES MINIMUM AND 0.5460 INCHES MAXIMUM
AGXF	STUD LENGTH	1.4390 INCHES MINIMUM AND 1.4860 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.312 INCHES
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP E52100 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OUTER RACE
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF