RAP3F5 2E9107A Part by Timken Corporation with NSN 3110-00-063-9706 - Request a Quote Now

Part Number: RAP3F5 2E9107A

Manufacturer: timken corporation

NSN: 3110-00-063-9706

CAGE Code: 21335

NIIN: 000639706

Item Name : bearing ball rod end

INC Code: 00049

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number RAP3F5 2E9107A from Timken Corporation (CAGE Code 21335), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RAP3F5 2E9107A Details:

Part number RAP3F5 2E9107A is manufactured by Timken Corporation and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-00-063-9706, the NIIN of this item is 000639706, its INC is 00049, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RAP3F5 2E9107A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RAP3F5 2E9107A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3110-00-063-9706, 3110000639706

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAZE	SHANK DIAMETER	0.4370 INCHES NOMINAL
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END
ABHP	OVERALL LENGTH	1.7650 INCHES NOMINAL
ABXV	BORE DIAMETER	0.1900 INCHES NOMINAL
ADZG	LUBRICATION MATERIAL	GREASE
AGGY	SHANK THREAD LENGTH	0.8125 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.3280 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.4370 INCHES NOMINAL
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.3750 INCHES NOMINAL
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
ASDB	WIDTH ACROSS FLATS	0.4370 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.312 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	PRELUBRICATED WITH 40 TO 50 PERCENT OF SPECIFIED GREASE; MAX NO. LOAD STARTING TORQUE 0.6400 OZ; BEARING SHALL CONFORM TO GENERAL DYNAMICS F. W. SPEC C 3116; DRILL HOLE NO. 50 DRILL; THRU SHANK PARALLEL WITH BORE 0.3125 IN. FROM SHANK END;
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	RUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL BALL
MATT	MATERIAL	STEEL INNER RING
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL SHAFT
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
STYL	STYLE DESIGNATOR	DOUBLE ROW, STAGGERED, BALL
THSD	THREAD SERIES DESIGNATOR	UNF