RT2-6PANG25 Part by Timken Corporation with NSN 3110-00-198-1121 - Request a Quote Now

Part Number: RT2-6PANG25

Manufacturer: timken corporation

NSN: 3110-00-198-1121

CAGE Code: 21335

NIIN: 001981121

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number RT2-6PANG25 from Timken Corporation (CAGE Code 21335), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RT2-6PANG25 Details:

Part number RT2-6PANG25 is manufactured by Timken Corporation and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-00-198-1121, the NIIN of this item is 001981121, its INC is 00040, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RT2-6PANG25

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RT2-6PANG25 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number RT2-6PANG25 with NSN 3110-00-198-1121, 3110001981121

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-198-1121 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	001981121		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RT2-6PANG25	2	2	3

Characteristics Data of NSN 3110-00-198-1121, 3110001981121

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.4375 INCHES NOMINAL
ABHP	OVERALL LENGTH	1.0470 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.6875 INCHES NOMINAL
AGRJ	STUD DIAMETER	0.2500 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.2810 INCHES NOMINAL
AGXF	STUD LENGTH	0.7500 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	28
CQJX	NOMINAL THREAD SIZE	0.250 INCHES
FEAT	SPECIAL FEATURES	CADMIUM EXPOSD SURFACE; MEANS FO R RELUBRICATION
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF