H913849XA Part by Timken Corporation with NSN 3110-00-593-7172 - Request a Quote Now

Part Number: H913849XA

Manufacturer: timken corporation

NSN: 3110-00-593-7172

CAGE Code: 60038

NIIN: 005937172

Item Name : bearing roller tapered

INC Code: 00021

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number H913849XA from Timken Corporation (CAGE Code 60038), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number H913849XA Details:

Part number H913849XA is manufactured by Timken Corporation and listed with the item name Bearing Roller Tapered. Classified under NSN 3110-00-593-7172, the NIIN of this item is 005937172, its INC is 00021, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for H913849XA

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part H913849XA with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number H913849XA with NSN 3110-00-593-7172, 3110005937172

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-593-7172 Item PartTypeName: BEARING,ROLLER,TAPERED	3110	005937172	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1678215	2	9	3

Characteristics Data of NSN 3110-00-593-7172, 3110005937172

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	3.5625 INCHES NOMINAL
ABXV	BORE DIAMETER	2.7500 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	5.7500 INCHES NOMINAL
AGWU	BACKFACE CORNER RADIUS	0.1250 INCHES NOMINAL
AGWV	STANDOUT WIDTH	0.6250 INCHES NOMINAL
AGWW	CONE CORNER RADIUS	0.1400 INCHES NOMINAL
AGWX	CONE WIDTH	3.5625 INCHES NOMINAL
AGWY	CUP WIDTH	2.3125 INCHES NOMINAL
AGYF	RETAINER FABRICATION METHOD	PRESSED
CTFZ	STANDARD TOLERANCE DESIGNATION	AFBMA CLASS 2
FEAT	SPECIAL FEATURES	2 SINGLE CUPS,2 SINGLE CONES
MATT	MATERIAL	STEEL OVERALL