AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number RAP3MS6-9E-9107A from Timken Corporation (CAGE Code 21335), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number RAP3MS6-9E-9107A Details:
Part number RAP3MS6-9E-9107A is manufactured by Timken Corporation and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-00-907-0093, the NIIN of this item is 009070093, its INC is 00049, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-907-0093 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 009070093 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ABR3M-105W | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.7660 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | FURNISHED WITH KEYWAY SLOT; 80 PCT FULL OF SPECIFIED LUBRICANT; HEAT STABILIZED FOR OPERATION AT 250 DEG F |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATT | MATERIAL | STEEL COMP 301 RETAINER |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI301 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
