REP3MLS6A-FS464 Part by Timken Corporation with NSN 3110-01-246-1850 - Request a Quote Now

Part Number: REP3MLS6A-FS464

Manufacturer: timken corporation

NSN: 3110-01-246-1850

CAGE Code: 21335

NIIN: 012461850

Item Name : bearing ball rod end

INC Code: 00049

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number REP3MLS6A-FS464 from Timken Corporation (CAGE Code 21335), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number REP3MLS6A-FS464 Details:

Part number REP3MLS6A-FS464 is manufactured by Timken Corporation and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-01-246-1850, the NIIN of this item is 012461850, its INC is 00049, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for REP3MLS6A-FS464

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part REP3MLS6A-FS464 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number REP3MLS6A-FS464 with NSN 3110-01-246-1850, 3110012461850

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-246-1850 Item PartTypeName: BEARING,BALL,ROD END	3110	012461850	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
ABRL3M-101	6	2	5

Characteristics Data of NSN 3110-01-246-1850, 3110012461850

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	LEFT-HAND
AAZE	SHANK DIAMETER	0.3750 INCHES NOMINAL
AAZF	SHANK STYLE	EXTERNALLY THREADED W/SLOT
ABHP	OVERALL LENGTH	2.5160 INCHES NOMINAL
ABXV	BORE DIAMETER	0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.9590 INCHES MINIMUM AND 0.9790 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	1.2810 INCHES MINIMUM AND 1.3430 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3970 INCHES MINIMUM AND 0.4170 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	2.0210 INCHES MINIMUM AND 2.0410 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.375 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	80 PCT FULL SPECIFIED LUBRICANT
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER OR PLASTIC POLYTETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 301 OR STEEL COMP 302 RETAINER
MATT	MATERIAL	STEEL COMP 4720H OR STEEL COMP 8620H OR STEEL COMP 348 ROD END BODY
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3652 ASSN STD 2ND MATERIAL RESPONSE SEAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A304 ASSN STD 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE ROD END BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5515 ASSN STD 2ND MATERIAL RESPONSE RETAINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
SFTT	SURFACE TREATMENT	CADMIUM EXPOSED SURFACES AS MOUNTED
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
THSD	THREAD SERIES DESIGNATOR	UNF
ZZZK	SPECIFICATION/STANDARD DATA	81205-BACB10AD MANUFACTURERS STANDARD