PFTD5 8 Part by Timken Corporation with NSN 3130-00-180-7314 - Request a Quote Now

Part Number: PFTD5 8

Manufacturer: timken corporation

NSN: 3130-00-180-7314

CAGE Code: 21335

NIIN: 001807314

Item Name : bearing unit ball

INC Code: 30556

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3130 Bearings Mounted

For competitive procurement options on part number PFTD5 8 from Timken Corporation (CAGE Code 21335), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PFTD5 8 Details:

Part number PFTD5 8 is manufactured by Timken Corporation and listed with the item name Bearing Unit Ball. Classified under NSN 3130-00-180-7314, the NIIN of this item is 001807314, its INC is 30556, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3130 Bearings Mounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PFTD5 8

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PFTD5 8 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number PFTD5 8 with NSN 3130-00-180-7314, 3130001807314

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3130-00-180-7314 Item PartTypeName: BEARING UNIT,BALL	3130	001807314		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
710405-1	C	9	5

Characteristics Data of NSN 3130-00-180-7314, 3130001807314

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.6275 INCHES NOMINAL
AGUX	MOUNTING HOLE WIDTH	0.2200 INCHES NOMINAL
AGYX	ROLLING ELEMENT GROOVE QUANTITY	1
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZH	INTERNAL FIT-UP DESIGNATION	STANDARD
AKRF	SEAL TYPE	CONTACT
AMCL	BLOCK TYPE	FIXED
ANJS	SHAFT END TYPE	OPEN
ANKF	SEAL LOCATION	BOTH ENDS
CBBL	FEATURES PROVIDED	GROUND ROLLING ELEMENT GROOVE
CWJW	MOUNTING HOLE TYPE	SQUARE
MATT	MATERIAL	IRON CAST HOUSING
MATT	MATERIAL	STEEL SEAL