748C416-001 Part by Timken Gears And Services Inc with NSN 2010-00-252-6272 - Request a Quote Now

Part Number: 748C416-001

Manufacturer: timken gears and services inc

NSN: 2010-00-252-6272

CAGE Code: 17454

NIIN: 002526272

Item Name : shaft propulsion ship

INC Code: 03044

Country: USA

NCB Code: 00

FSG: 20 Ship and Marine Equipment

FSC: 2010 Ship and Boat Propulsion Components

For competitive procurement options on part number 748C416-001 from Timken Gears And Services Inc (CAGE Code 17454), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 748C416-001 Details:

Part number 748C416-001 is manufactured by Timken Gears And Services Inc and listed with the item name Shaft Propulsion Ship. Classified under NSN 2010-00-252-6272, the NIIN of this item is 002526272, its INC is 03044, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 20 Ship and Marine Equipment and Class (FSC) 2010 Ship and Boat Propulsion Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 748C416-001

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 748C416-001 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 2010-00-252-6272, 2010002526272

MRC	Criteria	Characteristic
CPHX	Forward End Diameter	9.589 INCHES NOMINAL
CPJG	After End Keyway	NOT PROVIDED
APQB	Unit Type	INTERMEDIATE SHAFT SECTION
FEAT	Special Features	SPLINE TEETH,36 SPLINES,9.589 IN. MAJOR DIA,9.164 IN. MINOR DIA
CPHM	Forward End Design	STRAIGHT
CPNF	Threaded Forward End	NOT INCLUDED
AGYE	Surface Finish	125 MICROINCH FINISH ALL OVER EXCEPT 51.740 IN. LG FORWARD AND AFTER CENTERLINE OF SHAFT WHICH IS 63 MICROINCH FINISH
CPTD	Threaded After End	NOT INCLUDED
CPTC	After End Design	STRAIGHT
MATT	Material	STEEL,MIL,MIL-S-24093,FORGED
ARQS	Construction	SOLID
ABHP	Overall Length	9.477 FEET NOMINAL
ABMZ	Diameter	9.589 INCHES NOMINAL
CPJF	Forward End Keyway	NOT PROVIDED
ABKV	Outside Diameter	9.880 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply