Q92-1 Part by Tracor Flight Systems Inc with NSN 5310-00-595-9330 - Request a Quote Now

Part Number: Q92-1

Manufacturer: tracor flight systems inc

NSN: 5310-00-595-9330

CAGE Code: 7B709

NIIN: 005959330

Item Name : washer finishing

INC Code: 15932

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number Q92-1 from Tracor Flight Systems Inc (CAGE Code 7B709), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number Q92-1 Details:

Part number Q92-1 is manufactured by Tracor Flight Systems Inc and listed with the item name Washer Finishing. Classified under NSN 5310-00-595-9330, the NIIN of this item is 005959330, its INC is 15932, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for Q92-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part Q92-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number Q92-1 with NSN 5310-00-595-9330, 5310005959330

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-595-9330 Item PartTypeName: WASHER,FINISHING	5310	005959330	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
99-51400-001	2	2	3

Characteristics Data of NSN 5310-00-595-9330, 5310005959330

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.190 INCHES NOMINAL
ABKV	OUTSIDE DIAMETER	0.562 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.078 INCHES MINIMUM AND 0.094 INCHES MAXIMUM
ABMD	RECESS DIAMETER	0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.018 INCHES NOMINAL
CSTM	RECESS ANGLE	100.0 DEGREES MINIMUM
MATT	MATERIAL	STEEL OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 TYPE 301 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STYL	STYLE DESIGNATOR	FINISHING