PMS90402-020C Part by U S Army Aviation And Missile with NSN 5305-01-317-1320 - Request a Quote Now

Part Number: PMS90402-020C

Manufacturer: u s army aviation and missile

NSN: 5305-01-317-1320

CAGE Code: 18876

NIIN: 013171320

Item Name : screw assembly pane

INC Code: 33044

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number PMS90402-020C from U S Army Aviation And Missile (CAGE Code 18876), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PMS90402-020C Details:

Part number PMS90402-020C is manufactured by U S Army Aviation And Missile and listed with the item name Screw Assembly Pane. Classified under NSN 5305-01-317-1320, the NIIN of this item is 013171320, its INC is 33044, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PMS90402-020C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PMS90402-020C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number PMS90402-020C with NSN 5305-01-317-1320, 5305013171320

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-317-1320 Item PartTypeName: SCREW ASSEMBLY,PANEL	5305	013171320	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CA28080-06-7HS	5	2	3

Characteristics Data of NSN 5305-01-317-1320, 5305013171320

MRC	Criteria	Characteristic
ABQZ	INTERNAL DRIVE STYLE	HEXAGON
ASDB	WIDTH ACROSS FLATS	0.125 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 302 SPRING
MATT	MATERIAL	STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE STAND-OFF
AASK	HEAD STYLE	FLAT CHAMFER
CMLP	THREAD QUANTITY PER INCH	32
AASL	HEAD DIAMETER	0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.297 INCHES NOMINAL
AHYM	NOMINAL THREAD DIAMETER	0.138 INCHES
THSD	THREAD SERIES DESIGNATOR	UNC
MATT	MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L FASTENER