AS9120B, ISO 9001:2015, and FAA 0056B Accredited
Phone No.: +1-714-705-4780 Email: sales@justpartsunlimited.com
Phone No.: +1-714-705-4780 Email: sales@justpartsunlimited.com
| Part No. : 5151-8 | Alternate P/N : 51518 | Manufacturer : Uhrden Inc |
| CAGE Code : 05896 | Item Name : Resistor Variable Wire Wound Non | FSC : 5905 Resistors |
| NSN : 5905-00-890-4349 |
You can send a request for quote for p/n 5151-8 to ASAP Semiconductor using justpartsunlimited.com. This part is manufactured by Uhrden Inc (CAGE Code 05896). The description of it is Resistor Variable Wire Wound Non. The national stock number associated with this part is NSN 5905008904349. This part belongs to FSC Resistors part family. An associate from ASAP Semiconductor will respond within 15 minutes to your query. It is our pleasure to help you with 5151-8 part requirements.
Required fields compulsory *
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-890-4349 Item Description: Resistor Variable Wire Wound Non | 5905 | 008904349 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5151-8 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | III OVERALL LENGTH | 0.728 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABKW | III OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| ABMK | III OVERALL WIDTH | 0.190 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.083 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.527 INCHES MINIMUM AND 0.533 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.562 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 29616-025-002824 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
Please contact us to receive an instant quotation
