S332 Part by Umpco Inc with NSN 5340-01-576-1155 - Request a Quote Now

Part Number: S332

Manufacturer: umpco inc

NSN: 5340-01-576-1155

CAGE Code: 18076

NIIN: 015761155

Item Name : clamp loop

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number S332 from Umpco Inc (CAGE Code 18076), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number S332 Details:

Part number S332 is manufactured by Umpco Inc and listed with the item name Clamp Loop. Classified under NSN 5340-01-576-1155, the NIIN of this item is 015761155, its INC is 17532, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S332

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part S332 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number S332 with NSN 5340-01-576-1155, 5340015761155

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-576-1155 Item PartTypeName: CLAMP,LOOP	5340	015761155	S	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13055151	5	2	7

Characteristics Data of NSN 5340-01-576-1155, 5340015761155

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.750 INCHES NOMINAL
ABMZ	DIAMETER	0.531 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
AAAL	TONGUE HOLE TYPE	ROUND, UNTHREADED
ABPX	MATERIAL THICKNESS	0.030 INCHES NOMINAL
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	1.563 INCHES NOMINAL
BZTN	LOOP INSIDE DIAMETER	1.00 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	RG-33 AUV MRAP
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.123 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP, LOOP-CUSHIONED
FEAT	SPECIAL FEATURES	1/2 MOUNTING BOLT
MATT	MATERIAL	STEEL COMP 304 OR STEEL COMP 321 BAND
STYL	STYLE DESIGNATOR	SINGLE LOOP