GS21803-1 Part by United Technologies Corporation with NSN 4920-01-330-7877 - Request a Quote Now

Part Number: GS21803-1

Manufacturer: united technologies corporation

NSN: 4920-01-330-7877

CAGE Code: 77445

NIIN: 013307877

Item Name : fixture engine main

INC Code: 48925

Country: USA

NCB Code: 01

FSG: 49 Maintenance and Repair Shop Equipment

FSC: 4920 Aircraft Maintenance And Repair Shop Specialized Equipment

For competitive procurement options on part number GS21803-1 from United Technologies Corporation (CAGE Code 77445), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GS21803-1 Details:

Part number GS21803-1 is manufactured by United Technologies Corporation and listed with the item name Fixture Engine Main. Classified under NSN 4920-01-330-7877, the NIIN of this item is 013307877, its INC is 48925, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 49 Maintenance and Repair Shop Equipment and Class (FSC) 4920 Aircraft Maintenance And Repair Shop Specialized Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GS21803-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part GS21803-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4920-01-330-7877, 4920013307877

MRC	Criteria	Characteristic
AGAV	III END ITEM IDENTIFICATION	F100PW220/229 ENGINE
CYAG	NOMINAL OVERALL HEIGHT	0.375 INCHES
CXRQ	NOMINAL OVERALL WIDTH	4.800 INCHES
FTLD	FUNCTIONAL DESCRIPTION	USED TO FASTEN THE CIRCUIT BOARD DOWN TO GET THE CORRECT HEIGHT FOR THE THICKNESS OF THE SHIMS NEEDED TO PROPERLY POSITION CONNECTOR P2002 ON 780774-2 BOARD ASSEMBLY
SR-5	DESIGN CONTROL REFERENCE	GS21803-1
SR-5	MANUFACTURERS CODE	77445
RDAL	REFERENCE DATA AND LITERATURE	PRATT WIHTNEY SERD NO. 5618
FEAT	SPECIAL FEATURES	C/O A FLAT ALUMINUM PLATE WITH 3 THUMBSCREWS
CWFR	NOMINAL OVERALL LENGTH	7.560 INCHES
SR-5	THE MANUFACTURERS DATA