VCJ0002-5-15D Part by Valley Todeco Inc with NSN 5306-01-411-8943 - Request a Quote Now

Part Number: VCJ0002-5-15D

Manufacturer: valley todeco inc

NSN: 5306-01-411-8943

CAGE Code: 06710

NIIN: 014118943

Item Name : bolt shear

INC Code: 15903

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number VCJ0002-5-15D from Valley Todeco Inc (CAGE Code 06710), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number VCJ0002-5-15D Details:

Part number VCJ0002-5-15D is manufactured by Valley Todeco Inc and listed with the item name Bolt Shear. Classified under NSN 5306-01-411-8943, the NIIN of this item is 014118943, its INC is 15903, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for VCJ0002-5-15D

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part VCJ0002-5-15D with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5306-01-411-8943, 5306014118943

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.467 INCHES NOMINAL
AASB	FASTENER LENGTH	1.390 INCHES MINIMUM AND 1.420 INCHES MAXIMUM
AASK	HEAD STYLE	SPLINE DRIVE SHEAR HEAD
AASU	HEAD HEIGHT	0.187 INCHES NOMINAL
AAUR	GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
AAZH	HEAD MINOR DIAMETER	0.484 INCHES MINIMUM AND 0.511 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.3125 INCHES
ANEE	GRIP LENGTH	0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.285 INCHES NOMINAL FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF