C7985-3-4 Part by Wesco Aircraft Hardware Corp with NSN 5305-01-092-0088 - Request a Quote Now

Part Number: C7985-3-4

Manufacturer: wesco aircraft hardware corp

NSN: 5305-01-092-0088

CAGE Code: 1V757

NIIN: 010920088

Item Name : screw close tolerance

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number C7985-3-4 from Wesco Aircraft Hardware Corp (CAGE Code 1V757), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number C7985-3-4 Details:

Part number C7985-3-4 is manufactured by Wesco Aircraft Hardware Corp and listed with the item name Screw Close Tolerance. Classified under NSN 5305-01-092-0088, the NIIN of this item is 010920088, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for C7985-3-4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part C7985-3-4 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number C7985-3-4 with NSN 5305-01-092-0088, 5305010920088

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-092-0088 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	010920088	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5305PL0783191	2	9	6

Characteristics Data of NSN 5305-01-092-0088, 5305010920088

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES
ANEE	GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	32
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP H11 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF