WC4020-6-14 Part by West Coast Aerospace Inc with NSN 5305-01-494-9117 - Request a Quote Now

Part Number: WC4020-6-14

Manufacturer: west coast aerospace inc

NSN: 5305-01-494-9117

CAGE Code: 60516

NIIN: 014949117

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number WC4020-6-14 from West Coast Aerospace Inc (CAGE Code 60516), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number WC4020-6-14 Details:

Part number WC4020-6-14 is manufactured by West Coast Aerospace Inc and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-494-9117, the NIIN of this item is 014949117, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WC4020-6-14

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part WC4020-6-14 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number WC4020-6-14 with NSN 5305-01-494-9117, 5305014949117

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-494-9117 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	014949117	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HT4020-6-14	5	1	C			9

Characteristics Data of NSN 5305-01-494-9117, 5305014949117

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.500 INCHES MINIMUM AND 1.547 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK UNDERCUT"
AASL	HEAD DIAMETER	0.756 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	HIGH-TORQUE"
AHYM	NOMINAL THREAD DIAMETER	0.375 INCHES"
ANEE	GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	24"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM"
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP"
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.500 INCHES MINIMUM AND 1.547 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK UNDERCUT"
AASL	HEAD DIAMETER	0.756 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	HIGH-TORQUE"
AHYM	NOMINAL THREAD DIAMETER	0.375 INCHES"
ANEE	GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	24"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM"
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP"
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"