TLD2040BR3-04 Part by Winslow Adaptics Inc with NSN 5133-00-113-5125 - Request a Quote Now

Part Number: TLD2040BR3-04

Manufacturer: winslow adaptics inc

NSN: 5133-00-113-5125

CAGE Code: 12810

NIIN: 001135125

Item Name : cutter hole forming drive shank

INC Code: 32727

Country: USA

NCB Code: 00

FSG: 51 Hand Tools

FSC: 5133 Drill Bits Counterbores and Countersinks Hand and Machine

For competitive procurement options on part number TLD2040BR3-04 from Winslow Adaptics Inc (CAGE Code 12810), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TLD2040BR3-04 Details:

Part number TLD2040BR3-04 is manufactured by Winslow Adaptics Inc and listed with the item name Cutter Hole Forming Drive Shank. Classified under NSN 5133-00-113-5125, the NIIN of this item is 001135125, its INC is 32727, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 51 Hand Tools and Class (FSC) 5133 Drill Bits Counterbores and Countersinks Hand and Machine. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TLD2040BR3-04

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TLD2040BR3-04 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5133-00-113-5125, 5133001135125

MRC	Criteria	Characteristic
MATT	Material	STEEL COMP M7 OVERALL
AAZF	Shank Style	EXTERNALLY THREADED
CTHT	Included Angle	160.0 DEGREES NOMINAL
CQRN	Thread Quantity	28 PER INCH
CQFM	Hardness Rating	40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
CTBZ	Reamer Taper	0.250 INCHES PER FOOT NOMINAL
AKZH	Cutting End Style	SINGLE END
ALAR	Flute Quantity	4
ABPM	Body Diameter	0.365 INCHES NOMINAL
ALAM	Drill Diameter	0.128 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
AAVL	Pilot Diameter	0.128 INCHES NOMINAL
THSD	Thread Series Designator	UNF
AKZV	Cutting Rotation Direction	RIGHT-HAND
ABHP	Overall Length	2.250 INCHES NOMINAL
AKZL	Nominal Cutting Diameter	0.1564 INCHES
AHYM	Nominal Thread Diameter	0.250 INCHES
CBBL	Features Provided	TAPERED REAMER AND INTEGRAL PILOT
ALAN	Drill Length	1.376 INCHES NOMINAL