719B791A13 Part by Yokogawa Corporation with NSN 6625-01-024-9281 - Request a Quote Now

Part Number:  719B791A13
Manufacturer:  yokogawa corporation
CAGE Code:  60336
NIIN:  010249281
Item Name :  meter electrical fr
INC Code:  16454
Country:  USA
NCB Code:  01

For competitive procurement options on part number 719B791A13 from Yokogawa Corporation (CAGE Code 60336), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 719B791A13 Details:

Part number 719B791A13 is manufactured by Yokogawa Corporation and listed with the item name Meter Electrical Fr. Classified under NSN 6625-01-024-9281, the NIIN of this item is 010249281, its INC is 16454, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 719B791A13

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part 719B791A13 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-01-024-9281, 6625010249281

MRCCriteriaCharacteristic
MARKSPECIAL MARKINGSRED LINE AT 60 HERTZ
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 THREADED STUD
AMKDINDICATOR TYPEDIAL W/POINTER
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 SCREW AND 4 UNTHREADED HOLE
SUPPIII SUPPLEMENTARY FEATURESAMBIENT PRESSURE: 27.5 PLUS OR MINUS 3.5 INCHES OF MERCURY; IMPEDANCE: 1000 OHMS PER VOLT
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM
AMQYINSTALLATION DESIGNPANEL
APMMDIAL SCALE MARKING COLORBLACK SINGLE INDICATOR SINGLE RANGE
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
SPCLSPECIAL TEST FEATURESENVIRONMENTAL REQUIREMENTS PER MIL-M-16034
AGAVIII END ITEM IDENTIFICATIONCONTROL-INDICATOR,GENERAL STATUS; LITTON SYSTEMS INC. MODEL 792550
FAAZPHASESINGLE
AQFYBACKGROUND COLORWHITE SINGLE INDICATOR SINGLE RANGE
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE3.980 INCHES MAXIMUM
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM
ANRLMOUNTING ARRANGEMENT STYLEFOUR HOLE/STUD RECTANGULAR/SQUARE
BLSBSCALE SELECTION METHODTERMINAL
ACZBFREQUENCY RATING60.0 HERTZ NOMINAL
APPNACCURACY IN PERCENT-3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
ABTBMOUNTING HOLE DIAMETER0.311 INCHES MINIMUM AND 0.318 INCHES MAXIMUM
ASSSPOINTER COLORBLACK SINGLE INDICATOR SINGLE RANGE
ADZCENVIRONMENTAL PROTECTIONCOLD RESISTANT AND CORROSION RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
ABMKOVERALL WIDTH4.250 INCHES MINIMUM AND 4.750 INCHES MAXIMUM
ANSYFREQUENCY RESPONSE RANGE55.000 TO 65.000 HERTZ
CBBLFEATURES PROVIDEDMAGNETIC SHIELD AND ZERO ADJUSTER
ABWGSCALE DIVISION QUANTITY50 SINGLE INDICATOR SINGLE RANGE
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
BHMWMEASUREMENT RANGE55.0 TO 65.0 HERTZ SINGLE INDICATOR SINGLE RANGE
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
AKYNFURNISHED ITEMS AND QUANTITYNUT 8; WASHER 6
ABKWOVERALL HEIGHT4.250 INCHES MINIMUM AND 4.750 INCHES MAXIMUM
BHDCSCALE GRADUATION TYPELINEAR SINGLE INDICATOR SINGLE RANGE
AWZJPOWER SOURCEEXTERNAL
ANTGSENSITIVITY RATING10.0 VOLTS
FEATSPECIAL FEATURESRUGGEDIZED
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS3000.0
MATTMATERIALSTEEL
APSTMETER DEPTH BEHIND MOUNTING FLANGE6.320 INCHES MAXIMUM
BHSX(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPENONELECTRONIC
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDNONMAGNETIC
ABHPOVERALL LENGTH7.039 INCHES MAXIMUM
STYLSTYLE DESIGNATORRECTANGULAR FLUSH MTG
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top