JM43LC3SS7X Part by Zf Industrieantriebe Witten Gmbh with NSN 5340-01-007-4560 - Request a Quote Now

Part Number: JM43LC3SS7X

Manufacturer: zf industrieantriebe witten gmbh

NSN: 5340-01-007-4560

CAGE Code: D9182

NIIN: 010074560

Item Name : clamp loop

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number JM43LC3SS7X from Zf Industrieantriebe Witten Gmbh (CAGE Code D9182), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number JM43LC3SS7X Details:

Part number JM43LC3SS7X is manufactured by Zf Industrieantriebe Witten Gmbh and listed with the item name Clamp Loop. Classified under NSN 5340-01-007-4560, the NIIN of this item is 010074560, its INC is 17532, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for JM43LC3SS7X

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part JM43LC3SS7X with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number JM43LC3SS7X with NSN 5340-01-007-4560, 5340010074560

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-007-4560 Item PartTypeName: CLAMP,LOOP	5340	010074560	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
211-501-9115	5	2	3

Characteristics Data of NSN 5340-01-007-4560, 5340010074560

MRC	Criteria	Characteristic
AAAL	TONGUE HOLE TYPE	ROUND,UNTHREADED
AAAP	CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
ABMK	OVERALL WIDTH	0.375 INCHES NOMINAL
ABMZ	DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	0.811 INCHES NOMINAL
BZTN	LOOP INSIDE DIAMETER	0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
MATT	MATERIAL	STEEL COMP 302 OR STEEL COMP 321 BAND
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
SFTT	SURFACE TREATMENT	PASSIVATE BAND
STYL	STYLE DESIGNATOR	SINGLE LOOP