4085 4 Part by A P M Hexseal Corporation with NSN 2530-01-091-3590 - Request a Quote Now

Part Number: 4085 4

Manufacturer: a p m hexseal corporation

NSN: 2530-01-091-3590

CAGE Code: 97539

NIIN: 010913590

Item Name : boot dust and moist

INC Code: 19302

Country: USA

NCB Code: 01

FSG: 25 Vehicular Equipment Components

FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components

For competitive procurement options on part number 4085 4 from A P M Hexseal Corporation (CAGE Code 97539), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4085 4 Details:

Part number 4085 4 is manufactured by A P M Hexseal Corporation and listed with the item name Boot Dust And Moist. Classified under NSN 2530-01-091-3590, the NIIN of this item is 010913590, its INC is 19302, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 25 Vehicular Equipment Components and Class (FSC) 2530 Vehicular Brake Steering Axle Wheel and Track Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4085 4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4085 4 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 2530-01-091-3590, 2530010913590

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B
AASA	THREAD LENGTH	0.281 INCHES NOMINAL
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	ACID RESISTANT AND OZONE RESISTANT
ABKW	OVERALL HEIGHT	0.812 INCHES NOMINAL
ACUP	MOUNTING DEVICE QUANTITY	1
ACUW	SEALING METHOD	PACKING
ADAR	BODY OUTSIDE DIAMETER	1.125 INCHES NOMINAL
AGQD	BASE OUTSIDE DIAMETER	1.108 INCHES NOMINAL
AXGY	MOUNTING METHOD	INTEGRAL THREADED NUT
BGKC	OPENING INSIDE DIAMETER	0.735 INCHES NOMINAL
BZRR	THREAD SERIES	UNS
CMLP	THREAD QUANTITY PER INCH	32
CQJX	NOMINAL THREAD SIZE	0.875 INCHES
CSFT	BASE THREAD LOCATION	INTERNAL
FEAT	SPECIAL FEATURES	MATERIAL IS TRANSPARENT; NUT IS NICKEL-PLATED BRASS
MATT	MATERIAL	RUBBER SILICONE BODY
STYL	STYLE DESIGNATOR	CLOSED END