GT-1121 Part by Aeroflex Control Components Inc with NSN 5985-01-386-9608 - Request a Quote Now

Part Number:  GT-1121
CAGE Code:  64537
NIIN:  013869608
Item Name :  attenuator fixed
INC Code:  14224
Country:  USA
NCB Code:  01

For competitive procurement options on part number GT-1121 from Aeroflex Control Components Inc (CAGE Code 64537), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GT-1121 Details:

Part number GT-1121 is manufactured by Aeroflex Control Components Inc and listed with the item name Attenuator Fixed. Classified under NSN 5985-01-386-9608, the NIIN of this item is 013869608, its INC is 14224, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5985 Antennas Waveguides and Related Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GT-1121

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part GT-1121 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number GT-1121 with NSN 5985-01-386-9608, 5985013869608

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-386-9608

Item PartTypeName:

ATTENUATOR,FIXED

59850138696080PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
119635595

Characteristics Data of NSN 5985-01-386-9608, 5985013869608

MRCCriteriaCharacteristic
MRCDecoded RequirementClear Text Reply
AHUCCoaxial Connector Series DesignationSMA
BBHSTerminal Type And Quantity4 CONNECTOR
AGAVEnd Item IdentificationTEST SET, ANTENNA AN/PSM-40
AKNKVoltage Standing Wave Ratio Frequency Range+0.9/+2.2 GIGAHERTZ
AFGAOperating Temp Range-55.0/+90.0 DEG CELSIUS
ABKWOverall Height1.910 INCHES MINIMUM AND 1.950 INCHES MAXIMUM
ABMKOverall Width0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
AXGYMounting MethodUNTHREADED HOLE
BNGRFrequency Range0.900 GIGAHERTZ MINIMUM AND 2.200 GIGAHERTZ MAXIMUM
ABHPOverall Length2.140 INCHES MINIMUM AND 2.180 INCHES MAXIMUM
AJDKRf Signal Attenuation In Decibels20
ADAEMounting Hole/Stud Quantity4
AAQLBody StyleRECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES
ABKRCenter To Center Distance Between Mounting Facilities Parallel To Width1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM
ADAQBody Length1.760 INCHES MINIMUM AND 1.800 INCHES MAXIMUM
AEBVUnthreaded Mounting Hole Diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
AAFSApplication DesignTRANSMISSION LINE
ABKQCenter To Center Distance Between Mounting Facilities Parallel To Length0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
AHTWVoltage Standing Wave Ratio1.4



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top