632-0969-001 Part by Alcatel Lucent with NSN 5962-01-021-6411 - Request a Quote Now

Part Number:  632-0969-001
Manufacturer:  alcatel lucent
CAGE Code:  95104
NIIN:  010216411
Item Name :  microcircuit linear
INC Code:  31778
Country:  USA
NCB Code:  01

For competitive procurement options on part number 632-0969-001 from Alcatel Lucent (CAGE Code 95104), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 632-0969-001 Details:

Part number 632-0969-001 is manufactured by Alcatel Lucent and listed with the item name Microcircuit Linear. Classified under NSN 5962-01-021-6411, the NIIN of this item is 010216411, its INC is 31778, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5962 Microcircuits Electronic. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 632-0969-001

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part 632-0969-001 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 632-0969-001 with NSN 5962-01-021-6411, 5962010216411

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-021-6411

Item PartTypeName:

MICROCIRCUIT,LINEAR

59620102164110NB
CIICHCCESDPMICCriticalityENAC
7BG0
Part NumberISCRNVCRNCCHCCMSDSSADC
632-0969-001225

Characteristics Data of NSN 5962-01-021-6411, 5962010216411

MRCCriteriaCharacteristic
ADAQBODY LENGTH1.080 INCHES MAXIMUM
ADATBODY WIDTH0.940 INCHES MAXIMUM
ADAUBODY HEIGHT0.150 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-55.0 TO 100.0 DEG CELSIUS
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
CBBLFEATURES PROVIDEDMONOLITHIC AND HYBRID AND HERMETICALLY SEALED AND BURN IN
CQSJINCLOSURE MATERIALMETAL
CQSZINCLOSURE CONFIGURATIONFLAT PACK
CQZPINPUT CIRCUIT PATTERN4 INPUT
CWSGTERMINAL SURFACE TREATMENTSOLDER
FEATSPECIAL FEATURESCASE SHALL BE ELECTRICALLY CONDUCTIVE; INPUT FREQUENCY 220 MHZ TO 405 MHZ; INPUT SIGNAL LEVEL 63 MV TO 141 MV RMS
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT00724-72-00141 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY14 FLAT LEADS



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top