DP144T72-CSP Part by Allied Devices Corp with NSN 3020-01-395-3984 - Request a Quote Now

Part Number: DP144T72-CSP

Manufacturer: allied devices corp

NSN: 3020-01-395-3984

CAGE Code: 29964

NIIN: 013953984

Item Name : gear antibacklash spur

INC Code: 26668

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number DP144T72-CSP from Allied Devices Corp (CAGE Code 29964), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number DP144T72-CSP Details:

Part number DP144T72-CSP is manufactured by Allied Devices Corp and listed with the item name Gear Antibacklash Spur. Classified under NSN 3020-01-395-3984, the NIIN of this item is 013953984, its INC is 26668, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DP144T72-CSP

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part DP144T72-CSP with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number DP144T72-CSP with NSN 3020-01-395-3984, 3020013953984

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-01-395-3984 Item PartTypeName: GEAR,ANTIBACKLASH,SPUR	3020	013953984	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1651708	5	9	5

Characteristics Data of NSN 3020-01-395-3984, 3020013953984

MRC	Criteria	Characteristic
AGJS	PITCH DIAMETER	2.2500 INCHES NOMINAL
AJLA	TEETH QUANTITY	72
ANTP	BORE STYLE	PLAIN BOTH ENDS
CWCD	NOMINAL OUTSIDE DIAMETER	2.312 INCHES
CWPP	PRESSURE ANGLE	20.0000 DEGREES
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.239 INCHES SECOND END
CWRM	FACE NOMINAL WIDTH	0.188 INCHES
CWRS	BORE NOMINAL DIAMETER	0.249 INCHES BOTH ENDS
CWTR	HUB STYLE DESIGNATOR	SPLIT SECOND END
CWTX	HUB NOMINAL DIAMETER	0.312 INCHES SECOND END
CWWC	CLAMPING SURFACE NOMINAL LENGTH	0.239 INCHES SECOND END
CWWK	PRECISION CLASSIFICATION	QUALITY NUMBER 12
FEAT	SPECIAL FEATURES	ONE PRELOAD INDICATION HOLE 0.0625 IN. DIA LOCATED AXIALLY THROUGH GEAR BODY BOTH GEARS
MATT	III MATERIAL	ALUMINUM ALLOY 2024 FIRST GEAR
MATT	III MATERIAL	ALUMINUM ALLOY 2024 SECOND GEAR
MATT	III MATERIAL	STEEL COMP 303 HUB
MATT	III MATERIAL	STEEL COMP 303 SPRING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE HUB
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE FIRST GEAR
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE SECOND GEAR
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423,COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING
SFTT	SURFACE TREATMENT	ANODIZE FIRST GEAR
SFTT	SURFACE TREATMENT	ANODIZE SECOND GEAR
SFTT	SURFACE TREATMENT	PASSIVATE HUB
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE FIRST GEAR
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE SECOND GEAR
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35, TYPE II FED SPEC SINGLE TREATMENT RESPONSE HUB
STYL	STYLE DESIGNATOR	PROTRUDING HUB