30618-9-13 Part by Allied Signal Inc with NSN 1680-00-217-7375 - Request a Quote Now

Part Number: 30618-9-13

Manufacturer: allied signal inc

NSN: 1680-00-217-7375

CAGE Code: 72599

NIIN: 002177375

Item Name : shaft assembly flex

INC Code: 20315

Country: USA

NCB Code: 00

FSG: 16 Aircraft Components and Accessories

FSC: 1680 Miscellaneous Aircraft Accessories and Components

For competitive procurement options on part number 30618-9-13 from Allied Signal Inc (CAGE Code 72599), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 30618-9-13 Details:

Part number 30618-9-13 is manufactured by Allied Signal Inc and listed with the item name Shaft Assembly Flex. Classified under NSN 1680-00-217-7375, the NIIN of this item is 002177375, its INC is 20315, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 16 Aircraft Components and Accessories and Class (FSC) 1680 Miscellaneous Aircraft Accessories and Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 30618-9-13

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 30618-9-13 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 30618-9-13 with NSN 1680-00-217-7375, 1680002177375

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
1680-00-217-7375 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE	1680	002177375		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
30618-9-13	2	2	3

Characteristics Data of NSN 1680-00-217-7375, 1680002177375

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2 BOTH ENDS
AAJF	THREAD DIRECTION	RIGHT-HAND BOTH ENDS
AAUJ	SPLINE MAJOR DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM BOTH ENDS
ABHP	OVERALL LENGTH	12.375 INCHES NOMINAL
ABSA	SPLINE QUANTITY	12 BOTH ENDS
ABSC	SPLINE MINOR DIAMETER	0.188 INCHES MINIMUM AND 0.196 INCHES MAXIMUM BOTH ENDS
ADMS	WRENCHING FACILITY OUTSIDE DIAMETER	0.880 INCHES NOMINAL BOTH ENDS
AECT	THREAD DEPTH	0.250 INCHES NOMINAL BOTH ENDS
AEDN	TIP LENGTH	1.500 INCHES NOMINAL BOTH ENDS
AGJS	PITCH DIAMETER	0.250 INCHES NOMINAL BOTH ENDS
AJXJ	CORE MATERIAL	STEEL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNS BOTH ENDS
AKMH	CORE DIAMETER	0.250 INCHES NOMINAL
APJC	THREAD LOCATION	INTERNAL BOTH ENDS
APTD	END TYPE	ROUND,EXTERNAL SPLINED BOTH ENDS
AWZY	END CONNECTION TYPE	THREADED INTERNAL BOTH ENDS
AXFG	SPLINE PRESSURE ANGLE IN DEG	20.0 BOTH ENDS
AXFH	SPLINE LENGTH	0.955 INCHES MINIMUM AND 0.965 INCHES MAXIMUM BOTH ENDS
AXYS	SPLINE TYPE	INVOLUTE BOTH ENDS
BDRL	SETSCREW	NOT INCLUDED BOTH ENDS
BJPS	CASING MATERIAL	STEEL
BPPL	WRENCHING FACILITY TYPE	KNURLED SURFACE BOTH ENDS
CFQW	CROSS SECTION SIZE AND LOCATION	0.312 INCHES MINIMUM DIAMETER AND 0.314 INCHES MAXIMUM DIAMETER BOTH ENDS
CFRP	CASING LENGTH BETWEEN FERRULES	9.4062 INCHES NOMINAL
CFRQ	CASING OUTSIDE DIAMETER	0.485 INCHES NOMINAL
CFRT	SWIVEL END	NOT PROVIDED BOTH ENDS
CFRW	END OVERALL DIAMETER	0.880 INCHES NOMINAL BOTH ENDS
CFRY	LUBRICATION FITTING	NOT PROVIDED BOTH ENDS
CFRZ	CORE OVERALL LENGTH	12.375 INCHES NOMINAL
CFSB	CORE ROTATION DIRECTION	CLOCKWISE OR COUNTERCLOCKWISE
CFSL	CORE REMOVABILITY	REMOVABLE
CGDN	MINIMUM OPERATING RADIUS	5.000 INCHES
ZZZV	FSC APPLICATION DATA	ACTUATOR,ELECTRO-MECHANICAL LINEAR