TM SG811-CF-MMC-010 FIG 7-23 Part by Allied Systems Corp with NSN 4320-01-516-2342 - Request a Quote Now

Part Number: TM SG811-CF-MMC-010 FIG 7-23

Manufacturer: allied systems corp

NSN: 4320-01-516-2342

CAGE Code: 60848

NIIN: 015162342

Item Name : pump axial pistons

INC Code: 14791

Country: USA

NCB Code: 01

FSG: 43 Pumps AND Compressors

FSC: 4320 Power AND Hand Pumps

For competitive procurement options on part number TM SG811-CF-MMC-010 FIG 7-23 from Allied Systems Corp (CAGE Code 60848), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TM SG811-CF-MMC-010 FIG 7-23 Details:

Part number TM SG811-CF-MMC-010 FIG 7-23 is manufactured by Allied Systems Corp and listed with the item name Pump Axial Pistons. Classified under NSN 4320-01-516-2342, the NIIN of this item is 015162342, its INC is 14791, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 43 Pumps AND Compressors and Class (FSC) 4320 Power AND Hand Pumps. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TM SG811-CF-MMC-010 FIG 7-23

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TM SG811-CF-MMC-010 FIG 7-23 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4320-01-516-2342, 4320015162342

MRC	Criteria	Characteristic
AHZD	Pump Rotation Direction	CLOCKWISE
AHZN	Reciprocating Stroke Type	VARIABLE
MRC	Decoded Requirement	Clear Text Reply
CXCY	Part Name Assigned By Controlling Agency	PVG OPEN LOOP PUMP
AENG	Pumping Element Type	PISTON
AHYV	Maximum Discharge Flow Rate	57.6 GALLONS PER MINUTE
FEAT	Special Features	PART NUMBER BREAKDOWN: P=PUMP UNIT; V=VARIABLE TYPE; G=DESIGN TYPE; 130=UNIT SIZE 130 ML/REV; E1=DESIGN SERIES; U=SAE CONNECTORS AND MOUNTING; V=VITON SEAL; R=RIGHT HAND ROTATION; D=ONE-WAY SERVICE, SIDE PORTED THRU SHAFT VALVE PLATE; F=FLANGE CONNECTION; K=SHAFT END DESIGNATOR/SAE C SPLINE, LOOSE FIT; P=PRESSURE COMPENSATING CONTROL TYPE; 1NN=CONTROL MODIFIER, 1=SINGLE SETTING PRESSURE COMPENSATOR, N=SOLENOID VOLTAGE(NONE REQUIRED), N=CONNECTOR(NONE REQUIRED); KN=VOLUME STOPS; NN=AUXILIARY ADAPTER(NONE); NOMINAL PERFORMANCE SPEC: MAX. DISPLACEMENT 7.94IN/REV; RATED CONTINUOUS PRESSURE 3750PSI; MAX. PRESSURE 4250PSI; MAX. SPEED 2400RPM; POWER INLET @RATED CONTINUOUS PRESSURE AND 1800RPM-150 HP; NOMINAL DIMENSIONS: 13 IN.L X 8.4 IN.W X 7.3 IN.H, 110 LBS.; FACE MOUNTING: SAE C 2 BOLT