M687828304 Part by Argon St Inc with NSN 3040-01-542-1286 - Request a Quote Now

Part Number: M687828304

Manufacturer: argon st inc

NSN: 3040-01-542-1286

CAGE Code: 3B3G2

NIIN: 015421286

Item Name : collar shaft

INC Code: 13743

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number M687828304 from Argon St Inc (CAGE Code 3B3G2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number M687828304 Details:

Part number M687828304 is manufactured by Argon St Inc and listed with the item name Collar Shaft. Classified under NSN 3040-01-542-1286, the NIIN of this item is 015421286, its INC is 13743, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M687828304

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part M687828304 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number M687828304 with NSN 3040-01-542-1286, 3040015421286

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-01-542-1286 Item PartTypeName: COLLAR,SHAFT	3040	015421286	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
470-6878283	5	9	5

Characteristics Data of NSN 3040-01-542-1286, 3040015421286

MRC	Criteria	Characteristic
ABKV	OUTSIDE DIAMETER	2.775 INCHES NOMINAL
ABNM	THICKNESS	0.125 INCHES NOMINAL
ABPH	SMALL END DIAMETER	2.000 INCHES NOMINAL
ABXV	BORE DIAMETER	2.0370 INCHES NOMINAL
AEUZ	LARGEST DIAMETER LENGTH	1.000 INCHES NOMINAL
AGAV	III END ITEM IDENTIFICATION	AN/SLQ-25A TORPEDO COUNTERMEASURES SET
AHYF	SECURING HOLE QUANTITY	4
AHYG	ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	90.0
CQBP	SCREW THREAD SERIES DESIGNATOR AND LOCATION	ALL HOLES UNF
CQKB	SECURING HOLE TYPE AND LOCATION	THREADED ALL HOLES
CRWB	NOMINAL THREAD SIZE AND LOCATION	0.093 INCHES ALL HOLES
CXCY	III PART NAME ASSIGNED BY CONTROLLING AGENCY	INSERT
FEAT	SPECIAL FEATURES	INSERT ALSO HAS FOUR FLAT SPOTS FOR INSERTION INTO THE -3 RATCHET ON LOCKING DEVICE
MATT	MATERIAL	ALUMINUM ALLOY 6061
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
STYL	STYLE DESIGNATOR	ROUND STEPPED
ABKV	OUTSIDE DIAMETER	2.775 INCHES NOMINAL
ABNM	THICKNESS	0.125 INCHES NOMINAL
ABPH	SMALL END DIAMETER	2.000 INCHES NOMINAL
ABXV	BORE DIAMETER	2.0370 INCHES NOMINAL
AEUZ	LARGEST DIAMETER LENGTH	1.000 INCHES NOMINAL
AGAV	III END ITEM IDENTIFICATION	AN/SLQ-25A TORPEDO COUNTERMEASURES SET
AHYF	SECURING HOLE QUANTITY	4
AHYG	ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	90.0
CQBP	SCREW THREAD SERIES DESIGNATOR AND LOCATION	ALL HOLES UNF
CQKB	SECURING HOLE TYPE AND LOCATION	THREADED ALL HOLES
CRWB	NOMINAL THREAD SIZE AND LOCATION	0.093 INCHES ALL HOLES
CXCY	III PART NAME ASSIGNED BY CONTROLLING AGENCY	INSERT
FEAT	SPECIAL FEATURES	INSERT ALSO HAS FOUR FLAT SPOTS FOR INSERTION INTO THE -3 RATCHET ON LOCKING DEVICE
MATT	MATERIAL	ALUMINUM ALLOY 6061
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
STYL	STYLE DESIGNATOR	ROUND STEPPED