AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number EPC-13286 from Artisan Controls Corporation (CAGE Code 0AGK2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number EPC-13286 Details:
Part number EPC-13286 is manufactured by Artisan Controls Corporation and listed with the item name Relay Electromagnet. Classified under NSN 5945-01-107-5134, the NIIN of this item is 011075134, its INC is 32512, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5945 Relays and Solenoids. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5945-01-107-5134 Item Description: Relay Electromagnet | 5945 | 011075134 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Epc-13286 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.250 INCHES MINIMUM" |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.090 INCHES NOMINAL SINGLE MOUNTING FACILITY" |
| ABKW | OVERALL HEIGHT | 0.880 INCHES MAXIMUM" |
| ABMK | OVERALL WIDTH | 1.590 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | STEEL, CORROSION RESISTING" |
| ADZC | ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SHOCK RESISTANT AND HUMIDITY RESISTANT AND SALT SPRAY RESISTANT AND HERMETIC" |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.159 INCHES NOMINAL SINGLE MOUNTING FACILITY" |
| AKDX | WINDING QUANTITY | 1" |
| APCN | COIL QUANTITY | 1" |
| APNP | DUTY TYPE | CONTINUOUS" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE SINGLE MOUNTING FACILITY" |
| CQYJ | MOUNTING FACILITY PATTERN | TRIANGLE SINGLE MOUNTING FACILITY" |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY" |
| CRXH | TIME DELAY | 0.50 SECONDS MINIMUM FIXED RELEASE TIME AND 2.00 SECONDS MAXIMUM FIXED RELEASE TIME" |
| CRXH | TIME DELAY | 10.00 SECONDS MINIMUM FIXED OPERATE TIME" |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 1.750 INCHES MAXIMUM SINGLE MOUNTING FACILITY" |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 32.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING" |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 2.0 AMPERES DC RESISTIVE LOAD" |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 32.0 DC" |
| CWJB | ENERGIZING ELEMENT POWER RATING | 4.0 WATTS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE HOOK DUMMY" |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE HOOK ENERGIZING ELEMENT AND CONTACTS" |
| ABHP | OVERALL LENGTH | 2.250 INCHES MINIMUM" |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.090 INCHES NOMINAL SINGLE MOUNTING FACILITY" |
| ABKW | OVERALL HEIGHT | 0.880 INCHES MAXIMUM" |
| ABMK | OVERALL WIDTH | 1.590 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | STEEL, CORROSION RESISTING" |
| ADZC | ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SHOCK RESISTANT AND HUMIDITY RESISTANT AND SALT SPRAY RESISTANT AND HERMETIC" |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.159 INCHES NOMINAL SINGLE MOUNTING FACILITY" |
| AKDX | WINDING QUANTITY | 1" |
| APCN | COIL QUANTITY | 1" |
| APNP | DUTY TYPE | CONTINUOUS" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE SINGLE MOUNTING FACILITY" |
| CQYJ | MOUNTING FACILITY PATTERN | TRIANGLE SINGLE MOUNTING FACILITY" |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY" |
| CRXH | TIME DELAY | 0.50 SECONDS MINIMUM FIXED RELEASE TIME AND 2.00 SECONDS MAXIMUM FIXED RELEASE TIME" |
| CRXH | TIME DELAY | 10.00 SECONDS MINIMUM FIXED OPERATE TIME" |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 1.750 INCHES MAXIMUM SINGLE MOUNTING FACILITY" |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 32.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING" |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 2.0 AMPERES DC RESISTIVE LOAD" |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 32.0 DC" |
| CWJB | ENERGIZING ELEMENT POWER RATING | 4.0 WATTS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE HOOK DUMMY" |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE HOOK ENERGIZING ELEMENT AND CONTACTS" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
