PI1142-3A Part by Bae Systems Inc with NSN 5975-00-644-0109 - Request a Quote Now

Part Number: PI1142-3A

Manufacturer: bae systems inc

NSN: 5975-00-644-0109

CAGE Code: 80249

NIIN: 006440109

Item Name : boot dust and moisture seal

INC Code: 19302

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5975 Electrical Hardware and Supplies

For competitive procurement options on part number PI1142-3A from Bae Systems Inc (CAGE Code 80249), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PI1142-3A Details:

Part number PI1142-3A is manufactured by Bae Systems Inc and listed with the item name Boot Dust And Moisture Seal. Classified under NSN 5975-00-644-0109, the NIIN of this item is 006440109, its INC is 19302, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5975 Electrical Hardware and Supplies. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PI1142-3A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PI1142-3A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5975-00-644-0109, 5975006440109

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B"
AASA	THREAD LENGTH	0.176 INCHES NOMINAL"
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4"
ABKW	OVERALL HEIGHT	0.829 INCHES NOMINAL"
ABPX	MATERIAL THICKNESS	0.053 INCHES NOMINAL"
ACTW	DOME HEIGHT	0.791 INCHES NOMINAL"
ACUP	MOUNTING DEVICE QUANTITY	1"
ACUW	SEALING METHOD	COMPRESSION"
AXGY	MOUNTING METHOD	INTEGRAL THREADED NUT"
BGKC	OPENING INSIDE DIAMETER	0.125 INCHES NOMINAL"
BZRR	THREAD SERIES	WHITWORTH"
CQJX	NOMINAL THREAD SIZE	0.469 INCHES"
CSFT	BASE THREAD LOCATION	INTERNAL"
MATT	MATERIAL	RUBBER SILICONE BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ZZ-R-765,CL 1A,GR 50 FED SPEC SINGLE MATERIAL RESPONSE BODY"
STYL	STYLE DESIGNATOR	CLOSED END"
TEST	TEST DATA DOCUMENT	81349-MILB5423-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN"
AAJD	THREAD CLASS	2B"
AASA	THREAD LENGTH	0.176 INCHES NOMINAL"
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4"
ABKW	OVERALL HEIGHT	0.829 INCHES NOMINAL"
ABPX	MATERIAL THICKNESS	0.053 INCHES NOMINAL"
ACTW	DOME HEIGHT	0.791 INCHES NOMINAL"
ACUP	MOUNTING DEVICE QUANTITY	1"
ACUW	SEALING METHOD	COMPRESSION"
AXGY	MOUNTING METHOD	INTEGRAL THREADED NUT"
BGKC	OPENING INSIDE DIAMETER	0.125 INCHES NOMINAL"
BZRR	THREAD SERIES	WHITWORTH"
CQJX	NOMINAL THREAD SIZE	0.469 INCHES"
CSFT	BASE THREAD LOCATION	INTERNAL"
MATT	MATERIAL	RUBBER SILICONE BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ZZ-R-765,CL 1A,GR 50 FED SPEC SINGLE MATERIAL RESPONSE BODY"
STYL	STYLE DESIGNATOR	CLOSED END"
TEST	TEST DATA DOCUMENT	81349-MILB5423-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN"