PI1142-1 Part by Bae Systems Inc with NSN 5975-00-890-6553 - Request a Quote Now

Part Number: PI1142-1

Manufacturer: bae systems inc

NSN: 5975-00-890-6553

CAGE Code: 80249

NIIN: 008906553

Item Name : boot dust and moisture seal

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5975 Electrical Hardware and Supplies

For competitive procurement options on part number PI1142-1 from Bae Systems Inc (CAGE Code 80249), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PI1142-1 Details:

Part number PI1142-1 is manufactured by Bae Systems Inc and listed with the item name Boot Dust And Moisture Seal. Classified under NSN 5975-00-890-6553, the NIIN of this item is 008906553, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5975 Electrical Hardware and Supplies. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PI1142-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PI1142-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5975-00-890-6553, 5975008906553

MRC	Criteria	Characteristic
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	WATERTIGHT, MIL-B-5423
ABKW	OVERALL HEIGHT	0.875 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	0.875 INCHES NOMINAL
ADAU	BODY HEIGHT	0.344 INCHES NOMINAL
BGJZ	BASE INSIDE DIAMETER	0.688 INCHES NOMINAL
BGKC	OPENING INSIDE DIAMETER	0.125 INCHES NOMINAL
MATT	MATERIAL	RUBBER SILICONE BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-5423 MIL SPEC SINGLE MATERIAL RESPONSE BODY
STYL	STYLE DESIGNATOR	CLOSED END