AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 971-1227 from Bae Systems Inc (CAGE Code 81413), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 971-1227 Details:
Part number 971-1227 is manufactured by Bae Systems Inc and listed with the item name Synchro Transmitter. Classified under NSN 5990-00-686-4243, the NIIN of this item is 006864243, its INC is 02073, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-686-4243 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 006864243 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 210-2235 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.0920 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM BOTH SHAFTS |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL REAR SHAFT |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 100.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 595.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 409.00 NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.4 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWR | SHOULDER LENGTH | 0.0630 INCHES NOMINAL |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2130.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 427.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0470 INCHES NOMINAL BOTH SHAFTS |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED BOTH SHAFTS |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.4760 INCHES NOMINAL FRONT SHAFT |
| AJST | ROTOR INPUT CURRENT RATING | 10.0 MILLIAMPERES NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 126.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 126.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 20.0 CENTIMETER-GRAMS MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0470 INCHES NOMINAL BOTH SHAFTS |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0620 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
