20T-0076 Part by Bae Systems Land And Armaments Inc with NSN 5980-01-434-0118 - Request a Quote Now

Part Number: 20T-0076

Manufacturer: bae systems land and armaments inc

NSN: 5980-01-434-0118

CAGE Code: 44114

NIIN: 014340118

Item Name : light emitting diod

INC Code: 32371

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5980 Optoelectrical Devices and Associated Hardware

For competitive procurement options on part number 20T-0076 from Bae Systems Land And Armaments Inc (CAGE Code 44114), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 20T-0076 Details:

Part number 20T-0076 is manufactured by Bae Systems Land And Armaments Inc and listed with the item name Light Emitting Diod. Classified under NSN 5980-01-434-0118, the NIIN of this item is 014340118, its INC is 32371, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5980 Optoelectrical Devices and Associated Hardware. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20T-0076

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 20T-0076 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 20T-0076 with NSN 5980-01-434-0118, 5980014340118

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5980-01-434-0118 Item PartTypeName: LIGHT EMITTING DIODE	5980	014340118	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
20T-0076	5	2	7

Characteristics Data of NSN 5980-01-434-0118, 5980014340118

MRC	Criteria	Characteristic
ABKW	OVERALL HEIGHT	0.249 INCHES NOMINAL
ZZZK	SPECIFICATION/STANDARD DATA	44114-20T-0076 MANUFACTURERS SPECIFICATION CONTROL
ABJT	TERMINAL LENGTH	0.135 INCHES MINIMUM
ABMK	OVERALL WIDTH	0.386 INCHES NOMINAL
AXGY	MOUNTING METHOD	TERMINAL
CTSG	MAXIMUM OPERATING TEMP PER MEASUREMENT POINT	85.0 DEG CELSIUS AMBIENT AIR
ABHP	OVERALL LENGTH	0.542 INCHES NOMINAL
ABBH	INCLOSURE MATERIAL	PLASTIC
AYQS	TERMINAL CIRCLE DIAMETER	0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM