B73G-3AK-QD3-RMG Part by Barbee Valve And Supply Inc with NSN 4330-01-502-7259 - Request a Quote Now

Part Number: B73G-3AK-QD3-RMG

Manufacturer: barbee valve and supply inc

NSN: 4330-01-502-7259

CAGE Code: 4M588

NIIN: 015027259

Item Name : filter element fluid

INC Code: 32624

Country: USA

NCB Code: 01

FSG: 43 Pumps AND Compressors

FSC: 4330 Centrifugals Separators AND Pressure AND Vacuum Filters

For competitive procurement options on part number B73G-3AK-QD3-RMG from Barbee Valve And Supply Inc (CAGE Code 4M588), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number B73G-3AK-QD3-RMG Details:

Part number B73G-3AK-QD3-RMG is manufactured by Barbee Valve And Supply Inc and listed with the item name Filter Element Fluid. Classified under NSN 4330-01-502-7259, the NIIN of this item is 015027259, its INC is 32624, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 43 Pumps AND Compressors and Class (FSC) 4330 Centrifugals Separators AND Pressure AND Vacuum Filters. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for B73G-3AK-QD3-RMG

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part B73G-3AK-QD3-RMG with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4330-01-502-7259, 4330015027259

MRC	Criteria	Characteristic
MATT	Material	ALUMINUM BODY
CRXW	Filtering Media Design	SINTERED SINGLE FILTERING MEDIA RESPONSE
ADNP	Drop Pressure	15.0 POUNDS PER SQUARE INCH
ADNH	Filtration Rating In Microns	40.0 NOMINAL
ADAU	Body Height	10.190 INCHES NOMINAL
ADNK	Flow Direction	INSIDE OUT
ADAQ	Body Length	2.680 INCHES NOMINAL
FEAT	Special Features	MAX PRESSURE, METAL BOWL: 250 PSIG; AIR SUPPLY MUST BE DRY ENOUGH TO AVOID ICE FORMATION AT TEMP BELOW 35 DEG FAHRENHEIT; APPROX FLOW 150 PSIG INLET PRESSURE, 90 PSIG SET PRESSURE, DROP OF 15 PSIG FROM SET; BONNET, ALUMINUM; VALVE, BRASS; ELASTOMERS, NEOPRENE AND NITRILE; PANEL MOUNTING HOLE DIAMETER, 1.89 IN.; PANEL THICKNESS, 0.06IN. TO 0.25IN.
APGF	Design Type	NONREUSABLE
MEDA	Media For Which Designed	AIR
AGAV	End Item Identification	HYDRO PUMP
MRC	Decoded Requirement	Clear Text Reply
CXCY	Part Name Assigned By Controlling Agency	FILTER/REGULATOR
CSKY	Distance From Bottom Of Body To Center Of Inlet	6.150 INCHES NOMINAL
STYL	Style Designator	STRAIGHT FLOW BASKET STRAINER W/ BOLTED COVER