AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 98-915 from Bei Sensors And Systems Company Inc (CAGE Code 11534), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 98-915 Details:
Part number 98-915 is manufactured by Bei Sensors And Systems Company Inc and listed with the item name Resistor Variable N. Classified under NSN 5905-00-897-5747, the NIIN of this item is 008975747, its INC is 37405, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-897-5747 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 008975747 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 140203-9-4R75-502-502 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.938 INCHES MINIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.147 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.187 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 6.250 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.250 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 1.000 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | 4.735 INCHES MINIMUM |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | 4.720 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO 25.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | GUN,5 IN./54 CAL.,MK-4245; GUIDED MISSILE LAUNCHING SYSTEM,MK26; SURFACE MISSILE SYSTEM; GUN SYSTEM |
| TEST | TEST DATA DOCUMENT | 10001-2123322 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
