AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 3200-1043 from Bei Sensors And Systems Company Inc (CAGE Code 11534), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 3200-1043 Details:
Part number 3200-1043 is manufactured by Bei Sensors And Systems Company Inc and listed with the item name Resistor Variable Wire Wound Pre. Classified under NSN 5905-00-991-1505, the NIIN of this item is 009911505, its INC is 37408, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-991-1505 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009911505 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10-00211-000 | 6 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.74950 INCHES MINIMUM AND 0.75000 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.478 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.340 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 3.044 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.058 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.87500 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEA | SWITCH TYPE | ROTARY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3120.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3770.0 MINIMUM AND 3790.0 MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 2ND SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 10.0 1ST SECTION AND 40.0 2ND SECTION |
| FEAT | SPECIAL FEATURES | PEAK NOISE 75MV |
| TEST | TEST DATA DOCUMENT | 10001-11000-00724 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 SOLDER STUD |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
