205-001-905-1 Part by Bell Helicopter Textron Inc with NSN 1560-00-966-7522 - Request a Quote Now

Part Number: 205-001-905-1

Manufacturer: bell helicopter textron inc

NSN: 1560-00-966-7522

CAGE Code: 97499

NIIN: 009667522

Item Name : bell crank

INC Code: 22321

Country: USA

NCB Code: 00

FSG: 15 Aircraft and Airframe Structural Components

FSC: 1560 Airframe Structural Components

For competitive procurement options on part number 205-001-905-1 from Bell Helicopter Textron Inc (CAGE Code 97499), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 205-001-905-1 Details:

Part number 205-001-905-1 is manufactured by Bell Helicopter Textron Inc and listed with the item name Bell Crank. Classified under NSN 1560-00-966-7522, the NIIN of this item is 009667522, its INC is 22321, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 15 Aircraft and Airframe Structural Components and Class (FSC) 1560 Airframe Structural Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 205-001-905-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 205-001-905-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 205-001-905-1 with NSN 1560-00-966-7522, 1560009667522

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
1560-00-966-7522 Item PartTypeName: BELL CRANK	1560	009667522	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
205-001-905-001	2	2	5

Characteristics Data of NSN 1560-00-966-7522, 1560009667522

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.8738 INCHES MINIMUM AND 0.8743 INCHES MAXIMUM
ADGE	BORE LENGTH	0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.730 INCHES NOMINAL 1ST END
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	4.000 INCHES NOMINAL 2ND END
CZLN	END HOLE/BALL DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM 2ND END
CZLN	END HOLE/BALL DIAMETER	0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM 1ST END
MATT	MATERIAL	ALUMINUM ALLOY
ZZZV	FSC APPLICATION DATA	FUSELAGE SECT.,ACFT