TSPR1KL0.5CT Part by Bi Technologies Corporation with NSN 5905-01-359-3235 - Request a Quote Now

Part Number: TSPR1KL0.5CT

Manufacturer: bi technologies corporation

NSN: 5905-01-359-3235

CAGE Code: 73138

NIIN: 013593235

Item Name : resistor variable w

INC Code: 37408

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number TSPR1KL0.5CT from Bi Technologies Corporation (CAGE Code 73138), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TSPR1KL0.5CT Details:

Part number TSPR1KL0.5CT is manufactured by Bi Technologies Corporation and listed with the item name Resistor Variable W. Classified under NSN 5905-01-359-3235, the NIIN of this item is 013593235, its INC is 37408, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TSPR1KL0.5CT

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TSPR1KL0.5CT with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number TSPR1KL0.5CT with NSN 5905-01-359-3235, 5905013593235

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-359-3235 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	013593235	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1201R1KL0.5CT	5	2	5

Characteristics Data of NSN 5905-01-359-3235, 5905013593235

MRC	Criteria	Characteristic
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABPA	UNDERCUT DIAMETER	0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.560 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.780 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	0.8750 INCHES NOMINAL
AEFD	ACTUATOR TYPE	DOUBLE ENDED SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	360.0 NOMINAL
AEFY	SHAFT END PLAY	0.004 INCHES
AEFZ	SHAFT RUNOUT	0.001 INCHES
AEGA	LATERAL RUNOUT	0.002 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.0015 INCHES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.2 FREE AIR SINGLE SECTION
CRJS	FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION
CRKS	TAP LOCATION TOLERANCE PER SECTION	-1.0 TO 1.0 OHMS SINGLE SECTION
CSBW	TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS	500.0 SINGLE SECTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	60.0 SINGLE SECTION
AAPN	SECTION QUANTITY	1
ABPM	BODY DIAMETER	0.875 INCHES NOMINAL
AEGC	SHAFT RADIAL PLAY	0.002 INCHES
AXGY	MOUNTING METHOD	CLAMP RING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AAVL	PILOT DIAMETER	0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0620 INCHES NOMINAL
AEDA	MOUNTING LIP DEPTH	0.0620 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND
AEFK	MAXIMUM STARTING TORQUE	0.10 INCH-OUNCES
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50 TO 0.50 SINGLE SECTION
TTQY	TERMINAL TYPE AND QUANTITY	4 TURRET
AEDZ	SHAFT BEARING TYPE	BEARING
AEFL	MAXIMUM RUNNING TORQUE	0.10 INCH-OUNCES
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION