AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 81A2A G36 H13 H13 from Bourns Instruments Inc (CAGE Code 3Z867), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 81A2A G36 H13 H13 Details:
Part number 81A2A G36 H13 H13 is manufactured by Bourns Instruments Inc and listed with the item name Resistor Variable N. Classified under NSN 5905-01-351-9396, the NIIN of this item is 013519396, its INC is 37405, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-351-9396 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013519396 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 81A2A-G36-H13/H13 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABPA | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CXHN | SHAFT BEARING TYPE | BEARING |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.625 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,STEPPED,KNURLED |
| AEFM | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | AWADS RADAR |
| AGQL | UNDERCUT LENGTH | 0.375 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 234.0 MINIMUM AND 246.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| CBME | CUBIC MEASURE | 0.452 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 PIN |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.093 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 ALL SECTIONS |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
