CM41574-2 Part by Clarostat Sensors And Controls with NSN 5905-01-032-1808 - Request a Quote Now

Part Number: CM41574-2

Manufacturer: clarostat sensors and controls

NSN: 5905-01-032-1808

CAGE Code: 12697

NIIN: 010321808

Item Name : resistor variable w

INC Code: 37406

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number CM41574-2 from Clarostat Sensors And Controls (CAGE Code 12697), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CM41574-2 Details:

Part number CM41574-2 is manufactured by Clarostat Sensors And Controls and listed with the item name Resistor Variable W. Classified under NSN 5905-01-032-1808, the NIIN of this item is 010321808, its INC is 37406, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CM41574-2

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CM41574-2 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CM41574-2 with NSN 5905-01-032-1808, 5905010321808

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-032-1808 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	010321808		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2856546-2	1	2	5

Characteristics Data of NSN 5905-01-032-1808, 5905010321808

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABPM	BODY DIAMETER	1.219 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.875 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
ADAQ	BODY LENGTH	0.625 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BALL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	290.0 MINIMUM AND 305.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBME	CUBIC MEASURE	0.729 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 305.0 MAXIMUM
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION
TEST	TEST DATA DOCUMENT	56232-4331-102045 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB,SOLDER LUG