AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 376-0280-06 from Clarostat Sensors And Controls (CAGE Code 12697), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 376-0280-06 Details:
Part number 376-0280-06 is manufactured by Clarostat Sensors And Controls and listed with the item name Resistor Variable N. Classified under NSN 5905-01-216-2142, the NIIN of this item is 012162142, its INC is 37405, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-216-2142 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012162142 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 376-0280-06 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.906 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.125 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.600 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.781 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.500 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 250.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.50 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | B-1B AIRCRAFT |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND TAB |
| CBME | CUBIC MEASURE | 0.195 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TEST | TEST DATA DOCUMENT | 13499-376-0280 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 PIN |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
