GS4T040F104AA Part by Clarostat Sensors And Controls with NSN 5905-01-284-0461 - Request a Quote Now

Part Number:  GS4T040F104AA
CAGE Code:  12697
NIIN:  012840461
Item Name :  resistor variable n
INC Code:  37405
Country:  USA
NCB Code:  01

For competitive procurement options on part number GS4T040F104AA from Clarostat Sensors And Controls (CAGE Code 12697), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GS4T040F104AA Details:

Part number GS4T040F104AA is manufactured by Clarostat Sensors And Controls and listed with the item name Resistor Variable N. Classified under NSN 5905-01-284-0461, the NIIN of this item is 012840461, its INC is 37405, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GS4T040F104AA

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part GS4T040F104AA with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number GS4T040F104AA with NSN 5905-01-284-0461, 5905012840461

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-284-0461

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050128404610N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
37-513950-1223

Characteristics Data of NSN 5905-01-284-0461, 5905012840461

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/BUSHING
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL
ABNCFLAT HEIGHT0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ABXFSHAFT LENGTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH0.594 INCHES MAXIMUM
ADATBODY WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
ADAUBODY HEIGHT0.735 INCHES NOMINAL
AEDXSHAFT STYLEROUND,FLATTED
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS125.0 AND 28.0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION248.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE3.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE3.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE64.00 INCH-OUNCES
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION3.0
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATION5820-01-221-3440 RADIO SET
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
ARNHOPERATING POSITIONSTART OF ROTATION
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CBMECUBIC MEASURE0.150 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION100.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CQTMTERMINAL LOCATIONREAR-BOTTOM
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0.500 AC AND 1.500 DC
CXHNSHAFT BEARING TYPESLEEVE
TESTTEST DATA DOCUMENT04655-37-513950 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR
TTQYTERMINAL TYPE AND QUANTITY5 TAB,SOLDER LUG



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top