CM42495 Part by Clarostat Sensors And Controls with NSN 5905-01-300-0418 - Request a Quote Now

Part Number: CM42495

Manufacturer: clarostat sensors and controls

NSN: 5905-01-300-0418

CAGE Code: 12697

NIIN: 013000418

Item Name : resistor variable n

INC Code: 37405

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number CM42495 from Clarostat Sensors And Controls (CAGE Code 12697), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CM42495 Details:

Part number CM42495 is manufactured by Clarostat Sensors And Controls and listed with the item name Resistor Variable N. Classified under NSN 5905-01-300-0418, the NIIN of this item is 013000418, its INC is 37405, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CM42495

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CM42495 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CM42495 with NSN 5905-01-300-0418, 5905013000418

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-300-0418 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND	5905	013000418	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2068612-0701	2	2	3

Characteristics Data of NSN 5905-01-300-0418, 5905013000418

MRC	Criteria	Characteristic
ABPM	BODY DIAMETER	1.156 INCHES MAXIMUM
AEED	SWITCH VOLTAGE RATING IN VOLTS	125.0
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.5 KILOHMS ALL SECTIONS
CQTM	TERMINAL LOCATION	REAR-BOTTOM
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.25 FREE AIR 1ST SECTION AND 1.8 FREE AIR 2ND SECTION
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB,SOLDER LUG
AAPN	SECTION QUANTITY	2
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
ADAP	MOUNTING BUSHING LENGTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.490 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	360.0 NOMINAL
AEGJ	SWITCH CONTACT ARRANGEMENT	DOUBLE POLE,SINGLE THROW,ONE OPEN,ONE CLOSED
AJYN	SCREW THREAD DIAMETER	0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBBL	FEATURES PROVIDED	SWITCH
CBME	CUBIC MEASURE	1.564 CUBIC INCHES
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CXHN	SHAFT BEARING TYPE	SLEEVE
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AEEA	SWITCH TYPE	ROTARY
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 ALL SECTIONS
ABXF	SHAFT LENGTH	0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
AEFD	ACTUATOR TYPE	SINGLE SHAFT
ARNH	OPERATING POSITION	END OF ROTATION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQPH	DEVICE DESIGN TYPE	NONTURN AT 9 OCLOCK
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 ALL SECTIONS
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	2.000 AC