VERIFIER 320LC Part by Cross Match Technologies Inc with NSN 7025-01-585-9948 - Request a Quote Now

Part Number: VERIFIER 320LC

Manufacturer: cross match technologies inc

NSN: 7025-01-585-9948

CAGE Code: 1USE5

NIIN: 015859948

Item Name : touchscreen data entry

Country: USA

NCB Code: 01

FSG: 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment

FSC: 7025 ADP Input Output and Storage Devices

For competitive procurement options on part number VERIFIER 320LC from Cross Match Technologies Inc (CAGE Code 1USE5), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number VERIFIER 320LC Details:

Part number VERIFIER 320LC is manufactured by Cross Match Technologies Inc and listed with the item name Touchscreen Data Entry. Classified under NSN 7025-01-585-9948, the NIIN of this item is 015859948, its INC is , and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment and Class (FSC) 7025 ADP Input Output and Storage Devices. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for VERIFIER 320LC

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part VERIFIER 320LC with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 7025-01-585-9948, 7025015859948

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
FTLD	Functional Description	DUAL FINGERPRINT CAPTURE DEVICE
CHQQ	Maximum Overall Width	2.600 INCHES
CXCY	Part Name Assigned By Controlling Agency	DUAL FINGER SCANNER
CHQR	Maximum Overall Height	3.800 INCHES
CHQP	Maximum Overall Length	6.800 INCHES
FEAT	Special Features	AUTOMATIC CAPTURE OF TWO FLAT FINGERPRINTS SIMULATEOUSLY; AUTOMATIC CAPTURE OF ROLLED FINGERPRINTS; ROLLED FINGERPRINTS EITHER FROM NAIL TO NAIL OR ROCK'N ROLL; ID FINGERPRINT CAPTURE AT 15 FRAMES/SEC; RESOLUTION 500 PPI; CAPTURE AREA 1.600 IN. BY 1.500 IN.; IMAGE QUALITY STANDARDS FBI IAFIS APPENDIX F, PIV CERTIFIED; USB 2.0 INTERFACE; OPERATING SYSTEMS WINDOWS XP PROFESSIONAL SP2; WINDOWS VISTA 32
ADTV	Case Material	PLASTIC, POLYCARBONATE