RY118738 Part by Curtiss Wright Electro Mechanical Corporation with NSN 4320-00-677-0188 - Request a Quote Now

Part Number: RY118738

Manufacturer: curtiss wright electro mechanical corporation

NSN: 4320-00-677-0188

CAGE Code: 93232

NIIN: 006770188

Item Name : ring wearing

INC Code: 22534

Country: USA

NCB Code: 00

FSG: 43 Pumps AND Compressors

FSC: 4320 Power AND Hand Pumps

For competitive procurement options on part number RY118738 from Curtiss Wright Electro Mechanical Corporation (CAGE Code 93232), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RY118738 Details:

Part number RY118738 is manufactured by Curtiss Wright Electro Mechanical Corporation and listed with the item name Ring Wearing. Classified under NSN 4320-00-677-0188, the NIIN of this item is 006770188, its INC is 22534, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 43 Pumps AND Compressors and Class (FSC) 4320 Power AND Hand Pumps. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RY118738

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RY118738 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4320-00-677-0188, 4320006770188

MRC	Criteria	Characteristic
CSYM	SURFACE FINISH	125.0 MICROINCHES ALL SURFACES
ADXM	RIGHT SIDE FLANGE THICKNESS	0.375 INCHES NOMINAL
AJFM	END TO FLANGE DISTANCE	1.375 INCHES NOMINAL
AYRG	INTERNAL FLANGE WIDTH	0.375 INCHES NOMINAL
ADAS	BODY INSIDE DIAMETER	8.875 INCHES MINIMUM AND 8.878 INCHES MAXIMUM
AYRL	LARGEST EXTERNAL ANCHOR FLANGE RADIUS	6.032 INCHES NOMINAL
AYRS	DISTANCE FROM END	0.500 INCHES NOMINAL
MATT	MATERIAL	COPPER ALLOY
AYRE	INTERNAL FLANGE INSIDE DIAMETER	7.625 INCHES NOMINAL
ADXL	LEFT SIDE FLANGE THICKNESS	0.375 INCHES NOMINAL
AYRK	SMALLEST EXTERNAL ANCHOR FLANGE RADIUS	5.719 INCHES NOMINAL
AYRM	DISTANCE BELOW CENTERLINE	0.094 INCHES NOMINAL
ADNU	CORNER RADIUS	0.750 INCHES NOMINAL INSIDE RIGHT CORNER
AGRS	DISTANCE BETWEEN FLANGES	1.005 INCHES MINIMUM AND 1.007 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	GROOVED ON EXTERNAL FLANGE 0.750 IN. DIA BY 1.250 IN. DEEP WITH 0.375 IN. RADIUS AT CLOSED END ON A 10.250 IN. DIA CENTER LINE OF GROOVE
AAQL	BODY STYLE	INTERNAL FLANGE W/EXTERNAL LOCKING FLANGE
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER ROUND INSIDE RIGHT CORNER SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER
ADAR	BODY OUTSIDE DIAMETER	11.621 INCHES MINIMUM AND 11.623 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.750 INCHES NOMINAL