AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number DE102020002 from Dept Of Defence Casg Land Systems Division (CAGE Code Z5454), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number DE102020002 Details:
Part number DE102020002 is manufactured by Dept Of Defence Casg Land Systems Division and listed with the item name Worm Shaft. Classified under NSN 3040-00-517-9580, the NIIN of this item is 005179580, its INC is 18249, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-517-9580 Item PartTypeName: WORM SHAFT | 3040 | 005179580 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1290005179580 | 6 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.438 INCHES NOMINAL SECOND END,FIFTH PORTION |
| ABHP | OVERALL LENGTH | 4.750 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.090 INCHES NOMINAL SECOND END,FIFTH PORTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF SECOND END,FIFTH PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END,FIFTH PORTION |
| BYFR | TEETH HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 0.1666 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 29.000 |
| CFFG | WORM HELIX ANGLE | 5 DEG 52 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 0.519 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| CFFP | WORM BODY LENGTH | 0.910 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.406 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.438 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.500 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.810 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.840 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.308 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.313 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.340 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.375 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.390 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.625 INCHES NOMINAL FIRST END,SECOND PORTION |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| ZZZV | FSC APPLICATION DATA | QUADRANT,RANGE,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
