B25A-120 Part by Designatronics Incorporated with NSN 3020-00-858-7446 - Request a Quote Now

Part Number: B25A-120

Manufacturer: designatronics incorporated

NSN: 3020-00-858-7446

CAGE Code: 00328

NIIN: 008587446

Item Name : gear spur

INC Code: 05466

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number B25A-120 from Designatronics Incorporated (CAGE Code 00328), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number B25A-120 Details:

Part number B25A-120 is manufactured by Designatronics Incorporated and listed with the item name Gear Spur. Classified under NSN 3020-00-858-7446, the NIIN of this item is 008587446, its INC is 05466, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for B25A-120

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part B25A-120 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3020-00-858-7446, 3020008587446

MRC	Criteria	Characteristic
AAQL	BODY STYLE	PLAIN, SOLID"
ABSX	ATTACHMENT METHOD	MOUNTING HOLE"
AGJS	PITCH DIAMETER	1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM"
AJLA	TEETH QUANTITY	120"
ANTP	BORE STYLE	PLAIN BOTH ENDS"
CMLK	MOUNTING HOLE THREAD SERIES DESIGNATOR	UNC TRANSVERSELY THROUGH HUB, FIRST END"
CMLM	MOUNTING HOLE THREAD QUANTITY PER INCH	56 TRANSVERSELY THROUGH HUB, FIRST END"
CQLT	MOUNTING HOLE NOMINAL THREAD SIZE	0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END"
CTQY	MOUNTING HOLE TYPE AND QUANTITY	1 THREADED TRANSVERSELY THROUGH HUB, FIRST END"
CWCD	NOMINAL OUTSIDE DIAMETER	1.269 INCHES"
CWFR	NOMINAL OVERALL LENGTH	0.312 INCHES"
CWNH	TOOTH FORM	STANDARD"
CWPP	PRESSURE ANGLE	20.0000 DEGREES"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.187 INCHES FIRST END"
CWRM	FACE NOMINAL WIDTH	0.125 INCHES"
CWRS	BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS"
CWTR	HUB STYLE DESIGNATOR	PINNED FIRST END"
CWTX	HUB NOMINAL DIAMETER	0.312 INCHES FIRST END"
MATT	III MATERIAL	ALUMINUM ALLOY 2024 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	ANODIZE OVERALL"
STYL	STYLE DESIGNATOR	PROTRUDING HUB"
AAQL	BODY STYLE	PLAIN, SOLID"
ABSX	ATTACHMENT METHOD	MOUNTING HOLE"
AGJS	PITCH DIAMETER	1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM"
AJLA	TEETH QUANTITY	120"
ANTP	BORE STYLE	PLAIN BOTH ENDS"
CMLK	MOUNTING HOLE THREAD SERIES DESIGNATOR	UNC TRANSVERSELY THROUGH HUB, FIRST END"
CMLM	MOUNTING HOLE THREAD QUANTITY PER INCH	56 TRANSVERSELY THROUGH HUB, FIRST END"
CQLT	MOUNTING HOLE NOMINAL THREAD SIZE	0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END"
CTQY	MOUNTING HOLE TYPE AND QUANTITY	1 THREADED TRANSVERSELY THROUGH HUB, FIRST END"
CWCD	NOMINAL OUTSIDE DIAMETER	1.269 INCHES"
CWFR	NOMINAL OVERALL LENGTH	0.312 INCHES"
CWNH	TOOTH FORM	STANDARD"
CWPP	PRESSURE ANGLE	20.0000 DEGREES"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.187 INCHES FIRST END"
CWRM	FACE NOMINAL WIDTH	0.125 INCHES"
CWRS	BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS"
CWTR	HUB STYLE DESIGNATOR	PINNED FIRST END"
CWTX	HUB NOMINAL DIAMETER	0.312 INCHES FIRST END"
MATT	III MATERIAL	ALUMINUM ALLOY 2024 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	ANODIZE OVERALL"
STYL	STYLE DESIGNATOR	PROTRUDING HUB"