SKEE517 ITEM 12 Part by Drs Network And Imaging Systems Llc with NSN 5935-00-835-0510 - Request a Quote Now

Part Number:  SKEE517 ITEM 12
CAGE Code:  24290
NIIN:  008350510
INC Code:  15093
Country:  USA
NCB Code:  00

For competitive procurement options on part number SKEE517 ITEM 12 from Drs Network And Imaging Systems Llc (CAGE Code 24290), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SKEE517 ITEM 12 Details:

Part number SKEE517 ITEM 12 is manufactured by Drs Network And Imaging Systems Llc and listed with the item name Connector Receptacle Electrical. Classified under NSN 5935-00-835-0510, the NIIN of this item is 008350510, its INC is 15093, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SKEE517 ITEM 12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part SKEE517 ITEM 12 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SKEE517 ITEM 12 with NSN 5935-00-835-0510, 5935008350510

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-835-0510

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350083505100PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
010-004271-001E1CA

Characteristics Data of NSN 5935-00-835-0510, 5935008350510

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.187 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.585 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPEMOUNTING BUSHING
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRVCONNECTOR LOCKING METHODBAYONET PIN
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CXCJBUSHING ACCOMMODATION HOLE SHAPEROUND W/FLAT
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,EXTERNAL COUPLING
ADZCENVIRONMENTAL PROTECTIONMOISTURE PROOF
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.592 INCHES NOMINAL
AFQQMOUNTING FACILITY THICKNESS0.045 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLEBNC SINGLE MATING END
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
CQJXNOMINAL THREAD SIZE0.375 INCHES
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
TESTTEST DATA DOCUMENT81349-MIL-PRF-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLEC
THSDTHREAD SERIES DESIGNATORUNEF
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-PRF-39012/21 GOVERNMENT SPECIFICATION



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top