CT154-20 Part by Dynaco Corp with NSN 3020-01-325-0724 - Request a Quote Now

Part Number: CT154-20

Manufacturer: dynaco corp

NSN: 3020-01-325-0724

CAGE Code: 9W957

NIIN: 013250724

Item Name : gear spur

INC Code: 05466

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number CT154-20 from Dynaco Corp (CAGE Code 9W957), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CT154-20 Details:

Part number CT154-20 is manufactured by Dynaco Corp and listed with the item name Gear Spur. Classified under NSN 3020-01-325-0724, the NIIN of this item is 013250724, its INC is 05466, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CT154-20

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CT154-20 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CT154-20 with NSN 3020-01-325-0724, 3020013250724

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-01-325-0724 Item PartTypeName: GEAR,SPUR	3020	013250724	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CT154-20	2	2	3

Characteristics Data of NSN 3020-01-325-0724, 3020013250724

MRC	Criteria	Characteristic
CWRM	FACE NOMINAL WIDTH	0.125 INCHES
CWTX	HUB NOMINAL DIAMETER	0.406 INCHES BOTH ENDS
AAQL	BODY STYLE	PLAIN,SOLID
AGJS	PITCH DIAMETER	0.4166 INCHES NOMINAL
AJLA	TEETH QUANTITY	20
ANTP	BORE STYLE	PLAIN BOTH ENDS
CWCD	NOMINAL OUTSIDE DIAMETER	0.458 INCHES
CWPP	PRESSURE ANGLE	20.0000 DEGREES
CWRS	BORE NOMINAL DIAMETER	0.250 INCHES BOTH ENDS
CWTR	HUB STYLE DESIGNATOR	PINNED BOTH ENDS
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	PROTRUDING HUB
AGAV	END ITEM IDENTIFICATION	6660-01-148-1772
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.250 INCHES BOTH ENDS