MPS-WL-1 Part by Edwards Design And Fabrication Inc with NSN 5410-01-587-0829 - Request a Quote Now

Part Number: MPS-WL-1

Manufacturer: edwards design and fabrication inc

NSN: 5410-01-587-0829

CAGE Code: 3DZL6

NIIN: 015870829

Item Name : physical screening

Country: USA

NCB Code: 01

FSG: 54 Prefabricated Structures AND Scaffolding

FSC: 5410 Prefabricated and Portable Buildings

For competitive procurement options on part number MPS-WL-1 from Edwards Design And Fabrication Inc (CAGE Code 3DZL6), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MPS-WL-1 Details:

Part number MPS-WL-1 is manufactured by Edwards Design And Fabrication Inc and listed with the item name Physical Screening. Classified under NSN 5410-01-587-0829, the NIIN of this item is 015870829, its INC is , and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 54 Prefabricated Structures AND Scaffolding and Class (FSC) 5410 Prefabricated and Portable Buildings. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MPS-WL-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MPS-WL-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5410-01-587-0829, 5410015870829

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
MATT	Material	STEEL
TEXT	General Characteristics Item Description	PSP KIT INCLUDES: 18 EA FRAMES, NSN 5410-01-561-3080; 20 EA LEVELING PADS, NSN 5410-01-561-3091; 36 EA Z BARS, NSN 5410-01-561-3053; 36 EA TOP Z BARS, NSN 5410-01-586-8680; 18 EA WALKING BOARD, NSN 5410-01-586-8684; 6 EA END STABILIZER BAR, NSN 5410-01-586-8679; 68 EA E-GLASS ARMOR PANEL (4FT X 5FT X 5/8IN) NSN 9340-01; 8 EA E-GLASS ARMOR PANEL (4FT X 2FT X 5/8IN) NSN 9340-01-558-8471; 1 EA TRY CON II CONTAINER (NO NSN NECESSARY)
FEAT	Special Features	PSP PROTECTIVE WALL KIT COVERS 45 FT LONG BY 8 FT HIGH AREA