ET-2-31020 Part by Elcart Distribution Spa with NSN 5905-01-145-2812 - Request a Quote Now

Part Number:  ET-2-31020
Manufacturer:  elcart distribution spa
CAGE Code:  AC921
NIIN:  011452812
Item Name :  resistor variable w
INC Code:  37408
Country:  USA
NCB Code:  01

For competitive procurement options on part number ET-2-31020 from Elcart Distribution Spa (CAGE Code AC921), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ET-2-31020 Details:

Part number ET-2-31020 is manufactured by Elcart Distribution Spa and listed with the item name Resistor Variable W. Classified under NSN 5905-01-145-2812, the NIIN of this item is 011452812, its INC is 37408, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ET-2-31020

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part ET-2-31020 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number ET-2-31020 with NSN 5905-01-145-2812, 5905011452812

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-145-2812

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050114528120NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
7286R2KL.2521CA

Characteristics Data of NSN 5905-01-145-2812, 5905011452812

MRCCriteriaCharacteristic
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER0.875 INCHES NOMINAL
ABWVSHAFT DIAMETER0.250 INCHES MAXIMUM
ABXFSHAFT LENGTH0.812 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.312 INCHES NOMINAL
ADAQBODY LENGTH0.750 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.80 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE48.00 INCH-OUNCES
AEFYSHAFT END PLAY0.010 INCHES
AEFZSHAFT RUNOUT0.003 INCHES
AEGALATERAL RUNOUT0.005 INCHES
AEGBPILOT DIAMETER RUNOUT0.004 INCHES
AEGCSHAFT RADIAL PLAY0.003 INCHES
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top