DP-862 Part by Electro Mechano Inc with NSN 3020-01-238-8801 - Request a Quote Now

Part Number: DP-862

Manufacturer: electro mechano inc

NSN: 3020-01-238-8801

CAGE Code: 80300

NIIN: 012388801

Item Name : gear helical

INC Code: 05464

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number DP-862 from Electro Mechano Inc (CAGE Code 80300), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number DP-862 Details:

Part number DP-862 is manufactured by Electro Mechano Inc and listed with the item name Gear Helical. Classified under NSN 3020-01-238-8801, the NIIN of this item is 012388801, its INC is 05464, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DP-862

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part DP-862 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number DP-862 with NSN 3020-01-238-8801, 3020012388801

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-01-238-8801 Item PartTypeName: GEAR,HELICAL	3020	012388801	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
DP-862	5	2	3

Characteristics Data of NSN 3020-01-238-8801, 3020012388801

MRC	Criteria	Characteristic
AAQL	BODY STYLE	PLAIN,SOLID
ABSX	ATTACHMENT METHOD	MOUNTING HOLE
AGJS	PITCH DIAMETER	2.4998 INCHES NOMINAL
AJLA	TEETH QUANTITY	40
ANTP	BORE STYLE	W/COUNTERBORE SECOND END
CTQY	MOUNTING HOLE TYPE AND QUANTITY	2 PLAIN AXIALLY THROUGH BODY,FIRST END
CWCD	NOMINAL OUTSIDE DIAMETER	2.585 INCHES
CWMW	TEETH TYPE	SINGLE HELIX
CWNH	TOOTH FORM	STANDARD
CWNM	TOOTH DIRECTION	LEFT
CWPP	PRESSURE ANGLE	14.5000 DEGREES
CWPZ	HELIX ANGLE	36.8667 DEGREES
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.469 INCHES SECOND END
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	1.938 INCHES FIRST END
CWRM	FACE NOMINAL WIDTH	0.624 INCHES
CWRS	BORE NOMINAL DIAMETER	1.083 INCHES BOTH ENDS
CWTB	COUNTERBORE NOMINAL DEPTH	0.375 INCHES COUNTER BORE,SECOND END
CWTG	COUNTERBORE NOMINAL DIAMETER	1.999 INCHES COUNTER BORE,SECOND END
CWTR	HUB STYLE DESIGNATOR	1 GROOVE SECOND END
CWTR	HUB STYLE DESIGNATOR	2 GROOVES FIRST END
CWTX	HUB NOMINAL DIAMETER	1.250 INCHES FIRST END
CWTX	HUB NOMINAL DIAMETER	2.185 INCHES SECOND END
CWXY	FIRST GROOVE NOMINAL WIDTH	0.058 INCHES FIRST END
CWXY	FIRST GROOVE NOMINAL WIDTH	0.062 INCHES SECOND END
CWYD	FIRST GROOVE NOMINAL DIAMETER	1.195 INCHES FIRST END
CWYD	FIRST GROOVE NOMINAL DIAMETER	2.145 INCHES SECOND END
CWYL	NOMINAL DISTANCE FROM END TO FIRST GROOVE	0.407 INCHES SECOND END
CWYL	NOMINAL DISTANCE FROM END TO FIRST GROOVE	0.474 INCHES FIRST END
CWYR	SECOND GROOVE NOMINAL WIDTH	0.062 INCHES FIRST END
CWYW	SECOND GROOVE NOMINAL DIAMETER	1.210 INCHES FIRST END
CWZC	NOMINAL DISTANCE FROM END TO SECOND GROOVE	1.814 INCHES FIRST END
CWZK	MOUNTING HOLE NOMINAL DIAMETER	0.125 INCHES AXIALLY THROUGH BODY,FIRST END
CWZN	BOLT HOLE CIRCLE NOMINAL DIAMETER	1.875 INCHES AXIALLY THROUGH BODY,FIRST END
MATT	MATERIAL	STEEL COMP 8620 OVERALL
STYL	STYLE DESIGNATOR	PROTRUDING HUBS